Echotel® 300/301超声波非接触式发射器

北京恒远安诺科技有限公司经销各种欧美*液位计

Echo? 300/301超声波非接触式发射器

产品描述：

The Echo Model 300/301 is a full-featured, powerful ultrasonic transmitter for measurement of liquid level, volume, or open-channel flow. Explosion proof approvals are standard for both the transmitter and transducer.

Ative/passive mode for loop-power or device power of 4-20 mA output

16-button keypad and two-line, 16-character LCD alphanumeric display

Explosion proof approvals for both transmitter and transducer

QuickCal? allows complete calibration in 90 seconds

Maximum range of 30 feet (9.1 meters)

Therma? TA2质量流量传感器

产品描述：

Therma Model TA2 Thermal Mass Flow Transmitter provides reliable mass measurement for air and gas flow applications. The powerful, yet easy to use, electronics are contained in a compact explosion proof enclosure. The TA2 is available with both insertion probes as well as flow body design for smaller pipe sizes. The TA2 offers excellent performance at an exceptional value.

The TA2 offers the user the ability to verify calibration in the field reducing the need for periodic recalibration.

Direct mass flow measurement of air and gas

Excellent low flow sensitivity

High turndown ratios

Low pressure drop

Process temperatures to +400° F (+200° C)

Integral explosion proof enclosure

Eclipse? Enhanced 705导波雷达发射器

产品描述：

The Enhanced Eclipse Model 705 is a 24 VDC loop-powered level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%, allowing it to be used in SIL 2 loops.

This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.

Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and troubleshooting flexibility.

Low dielectric measurement capability (Er >_ 1.4)

Volumetric output

Quick connect/disconnect probe coupling

Operates in visible vapors and ignores most foams

IS, XP, and Non-Incendive approvals

Ignores coating buildup

Echo? 940/941超声波液位开关

产品描述：

Echo Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. These switches feature a 316 stainless steel tip-sensitive transducer that is offered in a variety of NPT, flanged, and sanitary process connections. The compact electronics are compley encapsulated just above the process fitting.

The Model 940 offers a 1-amp SPDT relay output. The Model 941 has a mA current shift output.

Pulsed electronics for excellent performance in difficult process conditions and superior immunity from sources of electromagnetic noise

Advanced transducer design provides reliable operation by draining viscous liquids and ignoring foam in turbulent applications

Suitable for SIL (Safety Integrity Level) 2 loops (FMEDA analysis data available)

Extremely compact unit is easily installed in areas where access space is limited

No calibration or configuration necessary

1 amp SPDT relay output (940), 8/16 mA current shift output (941)

Level1000液面记录仪

产品描述：

Level1000

The Level1000 is a rugged, submersible, temperature and water level data recorder. It's stainless steel enclosure makes it perfect for use in harsh, chemical and corrosive environments. The Level1000 is also equipped with an internal temperature sensor for recording temperature, as well as water level data. Data can be displayed in standard or metric units.

Echo? 960 AS-Interface?超声波液位开关

产品描述：

Echo Model 960 Ultrasonic Level Switches use pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for a wide variety of critical level applications.

Model 960 Switches use Actuator-Sensor-Interface (AS-i) bus digital communications for high or low single point liquid level measurement. AS-i is a versatile, low cost cabling solution that is a digital replacement for traditional hard wiring of field devices. The AS-i bus system provides a digital serial interface with a single unshielded two-wire cable for power and data transfer.

The industrial version of the Model 960 has a cast aluminum electronics housing and a wide variety of threaded or flanged versions of the ultrasonic transducer. The sanitary version is offered in a deep drawn 304 stainless steel housing and transducers with a 20 Ra surface finish.

Model 960 Switches use Actuator-Sensor-Interface (AS-i) bus digital communications for high or low single point liquid level measurement. AS-i is a versatile, low cost cabling solution that is a digital replacement for traditional hard wiring of field devices. The AS-i bus system provides a digital serial interface with a single unshielded two-wire cable for power and data transfer.

Patent pending technology provides unsurpassed reliability and testing of electronics, transducer, piezoelectric crystals, and electromagnetic noise

Adjustable time delay for turbulent aerated liquids

Tip-sensitive transducer measures level within 1/4" of the vessel bottom

Pulsed signal technology provides superior performance in difficult process conditions

AS-i output reduces cabling costs and simplifies installation.

Digital E3电子液面传感器

产品描述：

The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.

The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.

Two-wire, loop-powered, transmitter for level, interface or density measurement

No level change needed for configuration; no field calibration necessary

Safety Integrity Level (SIL) value of 2, SFF value of 92.3%

4-20 mA output signal

Two-line, 8-character LCD and 3-button keypad

Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43

Kotron? 82CE发射机

产品描述：

Model 82CE transmitter is one of the most cost effective level transmitters available today. Compact in size, it employs state-of-the-art surface mount technology in an encapsulated module for a stable, accurate measurement.

4-20 mA isolated output signal

Loop powered

Intrinsically safe

UDZ-3磁浮子翻板指示液位计

产品描述：

UDZ-3电远传磁浮子翻板指示液位计 产品概述

    BACAC系列UDZ型液位计的磁翻板指示器拆装快捷方便，安装方位可任意选择，观察方向可随意改动，因而仪表指示的可视度很大:UDZ型液位计的性能价格比明显高于采用多组玻璃板式液位计的性能价格比:UDZ型液位计的指示器、发讯器、以及液位变送器均与主体内被测介质*隔离的结构设计，使液位计工作在有压(可达320kg)、有毒和易燃的工况下，具有的安全性和可靠性;UDZ一3型采用了新颖设计，提高了传感器的灵敏度，其远传信号近乎零温漂和*稳定性使其始终干现场液位指示保持*;传感器和主体有一定的间隔，因而能有效地解决高温液体(可达480℃)的远距离检测和控制;
    鉴于UDZ型液位计上述的种种特点，其已被广泛地应用于石油、化工、轻工、电力、核工业以及食品、医药等工业中，对各种塔、罐、槽、箱等容器中介质的液位进行检测和控制。

UDZ-3基型电远传磁浮子翻板指示液位计/B本安防爆型

    该液位计主要由主体、磁浮子、传感器、变送器和翻板指示器五部分组成。其工作原理是以主体内的磁浮子随液位的升降而同时吸合传感器内相应位置上的干簧管，从而使传感器内的总电阻(或电压)发生相应的变化，然后通过变送器将电阻(或电压)的变化转变成4-20mA·DC的标准电流输出，再由我司专门配套生产的XTP-101型数显液位控制仪或SWP型光柱数显仪显示液位和设定上、下限报警，实现液位的位式控制或调节。或者与其它可以接受4-20mA·DC信号输入的任何显示仪或调节器相配套，实现对液位的远距离显示、位式控制、断续或连续的PID调节。

技术参数

环境温度:-10-+50℃
介质温度:≤80℃，也可以制作成≤480℃
输出信号:4-20mA·DC
供给电源:24V·DC±5%
测量精度:L=500-1000mm≤±1.5%FS, L>1000mm≤±1.0%FS
负载电阻:0-750Ω
防爆标志:ib II CT5
关联设备:JHA-B安全栅
其余参数和UDZ-I型相同

UDZ-1磁浮子翻板液位计

产品描述：

UDZ-1磁浮子翻板液位计产品概述

    BACAC系列UDZ型液位计的磁翻板指示器拆装快捷方便，安装方位可任意选择，观察方向可随意改动，因而仪表指示的可视度很大:UDZ型液位计的性能价格比明显高于采用多组玻璃板式液位计的性能价格比:UDZ型液位计的指示器、发讯器、以及液位变送器均与主体内被测介质*隔离的结构设计，使液位计工作在有压(可达320kg)、有毒和易燃的工况下，具有的安全性和可靠性;UDZ一3型采用了新颖设计，提高了传感器的灵敏度，其远传信号近乎零温漂和*稳定性使其始终干现场液位指示保持*;传感器和主体有一定的间隔，因而能有效地解决高温液体(可达480℃)的远距离检测和控制;
    鉴于UDZ型液位计上述的种种特点，其已被广泛地应用于石油、化工、轻工、电力、核工业以及食品、医药等工业中，对各种塔、罐、槽、箱等容器中介质的液位进行检测和控制。

UDZ-1基型磁浮子翻板指示液位计

     该液位计是以浮子内磁钢驱动双色薄片的翻转来指示液位的一种新型仪表。主体内磁浮子随液位的升降而上下运动，同时驱使主体外指示器内的双色薄片翻转，有液位时转示红色、无液位时转示黑色。红色和黑色色带间的界线即代表液位高度。在指示器左侧配有醒目的刻度标尺，从而使液位的指示显得更加清晰。

技术参数

测量范围:200-15000mm
测量精度:±10mm
介质温度:≤480℃
介质比重:≥0.4
介质粘度:≤0.02Pa·S

OES-100E-001液位开关

产品描述：

OES-100E-001液位开关

The Model OES-100 snap switch is utilized to expand the control capabilities of Orion’s extensive line of magnetic level indicators.

This cam-operated double pole double throw mechanism is clamp-mounted to the outside of the MLI. This mounting style allows easy addition or repositioning of switches without disruption of the process.  Designed for optimal repeatability and reliability, the OES-100 is actuated by simple magnetic coupling.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired.

The Model OES-100 snap switch is a cam-operated double pole double throw mechanism clamp-mounted to the outside of the MLI.

The OES-100 is actuated by simple magnetic coupling. As the liquid level moves, the MLI float (with its internal magnets and flux rings) follows. When the float

moves into the proximity of the snap switch, the switch magnet interacts with the float’s magnetic field actuating the switch. The bi-stable design of the switch ensures that it will not reset until the float passes the switch in the opposite direction.

UDZ-1D/3D/B磁浮子翻板指示液位计

产品描述：

UDZ-1D,UDZ-3D/B插入型

产品概述 

    BACAC系列UDZ型液位计的磁翻板指示器拆装快捷方便，安装方位可任意选择，观察方向可随意改动，因而仪表指示的可视度很大:UDZ型液位计的性能价格比明显高于采用多组玻璃板式液位计的性能价格比:UDZ型液位计的指示器、发讯器、以及液位变送器均与主体内被测介质*隔离的结构设计，使液位计工作在有压(可达320kg)、有毒和易燃的工况下，具有的安全性和可靠性;UDZ一3型采用了新颖设计，提高了传感器的灵敏度，其远传信号近乎零温漂和*稳定性使其始终干现场液位指示保持*;传感器和主体有一定的间隔，因而能有效地解决高温液体(可达480℃)的远距离检测和控制;

   鉴于UDZ型液位计上述的种种特点，其已被广泛地应用于石油、化工、轻工、电力、核工业以及食品、医药等工业中，对各种塔、罐、槽、箱等容器中介质的液位进行检测和控制。

UDZ-1D、UDZ-3D/B插入型
磁浮子翻板指示液位计

该液位计适用于地下槽、池的液位测量和控制。

技术参数

测量范围:L≤3500mm
介质粘度:≤0.1Pa·s
介质温度:≤80℃，也可制作成≤480℃
其余参数:UDZ-1D同UDZ-1
UDZ-3D同UDZ-3
容器法兰:规格HG20593-97(FM)

OES-100电磁开关

产品描述：

The Model OES-100 snap switch is utilized to expand the control capabilities of Orion’s extensive line of magnetic level indicators.

This cam-operated double pole double throw mechanism is clamp-mounted to the outside of the MLI. This mounting style allows easy addition or repositioning of switches without disruption of the process.  Designed for optimal repeatability and reliability, the OES-100 is actuated by simple magnetic coupling.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired.

The Model OES-100 snap switch is a cam-operated double pole double throw mechanism clamp-mounted to the outside of the MLI.

The OES-100 is actuated by simple magnetic coupling. As the liquid level moves, the MLI float (with its internal magnets and flux rings) follows. When the float

moves into the proximity of the snap switch, the switch magnet interacts with the float’s magnetic field actuating the switch. The bi-stable design of the switch ensures that it will not reset until the float passes the switch in the opposite direction.

ORS-300电磁开关

产品描述：

The Model ORS-300 reed switch is available to augment the control capabilities of Orion’s extensive line of magnetic level indicators. Housed in an explosion proof stainless steel enclosure, the ORS-300 mounts to the outside of the MLI via clamps.

Each switch is designed for optimal repeatability and reliability.

For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired. This mounting style allows addition or repositioning of switches at any time, without disruption of the process.

The Model ORS-300 reed switch is housed in an explosion proof stainless steel enclosure, the ORS-300 mounts to the outside of the MLI via clamps. This mounting style allows addition or repositioning of switches at any time, without

disruption of the process.

The magnetic field produced by the MLI float actuates the ORS-300 when the liquid level moves the float into the proximity of the reed switch. The switch is bi-stable, so it will not reset until the float’s magnetic field passes it in the opposite direction.

UDZ-1J/3J/B磁浮子翻板指示液位计

产品描述：

UDZ-1J,UDZ-3J/B磁浮子翻板指示液位计 产品概述

    BACAC系列UDZ型液位计的磁翻板指示器拆装快捷方便，安装方位可任意选择，观察方向可随意改动，因而仪表指示的可视度很大:UDZ型液位计的性能价格比明显高于采用多组玻璃板式液位计的性能价格比:UDZ型液位计的指示器、发讯器、以及液位变送器均与主体内被测介质*隔离的结构设计，使液位计工作在有压(可达320kg)、有毒和易燃的工况下，具有的安全性和可靠性;UDZ一3型采用了新颖设计，提高了传感器的灵敏度，其远传信号近乎零温漂和*稳定性使其始终干现场液位指示保持*;传感器和主体有一定的间隔，因而能有效地解决高温液体(可达480℃)的远距离检测和控制;
    鉴于UDZ型液位计上述的种种特点，其已被广泛地应用于石油、化工、轻工、电力、核工业以及食品、医药等工业中，对各种塔、罐、槽、箱等容器中介质的液位进行检测和控制。

UDZ-1J、UDZ-3J/B耐强腐蚀型
磁浮子翻板指示液位计

该液位计所有与介质接触的零部 件均采用钢塑复合管。所以能适用于各种强腐蚀介质的液位测量和控制。

技术参数

介质温度:≤200℃
钢衬聚丙烯:-25-110℃
钢衬聚乙烯:-15-70℃
钢衬聚氟类:-100-250℃
其余参数:
UDZ-1J同UDZ-1
UDZ-3J同UDZ-3

UDZ-1W,UDZ-3W/B磁浮子翻板指示液位计

产品描述：

UDZ-1 W,UDZ-3 W/B磁浮子翻板液位计

产品概述

    BACAC系列UDZ型液位计的磁翻板指示器拆装快捷方便，安装方位可任意选择，观察方向可随意改动，因而仪表指示的可视度很大:UDZ型液位计的性能价格比明显高于采用多组玻璃板式液位计的性能价格比:UDZ型液位计的指示器、发讯器、以及液位变送器均与主体内被测介质*隔离的结构设计，使液位计工作在有压(可达320kg)、有毒和易燃的工况下，具有的安全性和可靠性;UDZ一3型采用了新颖设计，提高了传感器的灵敏度，其远传信号近乎零温漂和*稳定性使其始终干现场液位指示保持*;传感器和主体有一定的间隔，因而能有效地解决高温液体(可达480℃)的远距离检测和控制;
    鉴于UDZ型液位计上述的种种特点，其已被广泛地应用于石油、化工、轻工、电力、核工业以及食品、医药等工业中，对各种塔、罐、槽、箱等容器中介质的液位进行检测和控制。

UDZ-1 W , UDZ-3 W/B保温型磁浮子翻板指示液位计

该液位计是在基型的主体外安装一个保温夹套而构成，通入蒸汽等热媒剂，可以保持主
体内液体的正常流动，因此适用于易凝固液体的液位测量和控制。对于低沸点液体可通入冷水等冷媒剂，以保证液体的稳定，使仪表正确指示出被测液位。

基本参数

介质粘度:≤0.15Pa·S
基本参数:UDZ-lW同UDZ-1
UDZ-3W同UDZ-3

BM26磁浮子液位计

产品描述：

BM 26(G)是金属管结构，带有标尺，磁性翻板或磁浮子指示液位、界面，并可安装液位变送器，液位开关，适用于开放或封闭压力容器内的液位或界面测量的液位计。根据用户需要，BM26（G）可以安装4-20mA远传信号输出变送器，开关信号传送器，数字液位显示器。高温、高压、低密度特殊浮子的设计，钛材，316L，PTFE衬里等防腐材料选用，X-射线探伤检测，可以保证产品适用于任何现场需求。

结构简单，坚固可靠，运行稳定
磁翻板、磁浮子密封在玻璃管中
大尺寸刻度，醒目易读
测量介质与显示、信号输出密封隔离
可以安装4-20mA液位变送器
可以安装液位开关传感器
多种防腐材料选择304，316，316L，钛，哈氏合金等
多种安装形式
多种连接形式

BM26G磁浮子液位计

产品描述：

zui高*公称压力≤25MPa（特殊要求40MPa）
zui高*介质温度≤400℃
zui低*介质温度-200℃
介质密度≥0.3g/cm³
界面测量（密度差≥0.1g/cm³）
适用于沙尘，海风，多雨的环境条件
具有浮子失效显示

KEY电缆浮球液位开关

产品描述：

该产品的显著特点是性能稳定可靠（不因液面的波动而引起误动作），同时，它还具有无毒、耐腐蚀、安装方便、价格低廉、使用寿命长等特点。

技术参数：